Injection Foam

Injection Foam Insulation Services in Charleston, Lexington, Huntington 

Save money with  energy efficient injection foam insulation

Watch this video about insulating exterior walls with AirKrete.

Reed's Sprayfoam Insulation is your trusted resource for injection foam insulation in Kentucky, West Virginia and Ohio, Kentucky, West Virginia and Ohio. Our injection foam uses proven revolutionary technology to deliver leading performance, safety, comfort and durability. Our injection foam is an excellent retrofit choice for wood, vinyl, and aluminum-sided homes, as well as brick stucco or block.

Injection foam insulation is sometimes referred to as injected foam or injectable foam insulation. Whatever term you use, this relatively new type of home insulation is gaining a strong following among homeowners who want to make their homes more comfortable and less expensive to heat and cool.

Injected or injectable spray foam insulation is not the same as expanding spray foam insulation, even though the two materials look alike. Expanding spray foam (aka spray polyurethane foam, or SPF) does what its name suggests, expanding after it’s applied, sticking to the surfaces it contacts, and then hardening to form a permanent insulation, air and moisture barrier.

Because of its expansive force, this type of foam can’t be injected into enclosed building cavities because it will cause gypsum board or sheathing to bow or pop away from the framing it’s attached to.

If you are in need of an insulation upgrade, contact Reed's Sprayfoam Insulation for a Free Estimate for injection foam insulation in Huntington, Lexington, Charleston and all surrounding cities and towns!

Reed's Sprayfoam Insulation installs injection foam insulation that’s safe and effective

Our injection foam is a non-expanding injectable foam insulation that provides all the advantages of spray foam insulation with none of the risks. Our injection foam is:

Super energy efficient. Like spray foam insulation, our injection foam combines the benefits of air sealing with high R-value. The injection foam effectively seals around edges to protect against infiltrating air. It is rated at R-3.9 at 2.07lbs/ft3.

Fire-resistant, mold-proof, pest deterring. Our injection foam is used a fire-stop material and passed a 2-hour fire wall test. The injection foam material has proven to be resistant to mold growth at both 75% and 95% relative humidity. It is also pest resistant because of its deoiling/drying effect on pests.

Perfect for retrofit applications. Many 2-part foams can’t be sprayed into a finished wood-frame wall because high expansion rates will cause the wallboard to bow or even pop off the wall. It is non-expanding and is extremely flexible. It’s designed to flow and fill around electrical wires, outlet boxes and existing underperforming insulation. It’s a great way to give an existing house a comfort and energy-efficiency makeover.

Insulate wall cavities with injection foam - the ideal solution

Air Krete® insulation for Richmond

A no-mess retrofit solution. The average injection foam application in a home takes less than two days and is applied through the exterior walls and in the attic to deliver comfortable living and energy savings.

Injection foam does not expand after it’s applied, so it won’t cause damage when injected into a wall cavity or other building cavity. In fact, the foam has ideal qualities for upgrading wall insulation levels. (It’s sometimes referred to as “wall injection foam.”) Once holes are drilled in the wall (from inside or outside the house) to provide access to each stud bay, an application hose is inserted and the injection foam is applied.

With the consistency of shaving cream, the foam can totally fill an empty cavity or flow around an existing fiberglass batt, eliminating air spaces (voids) and sealing all air leaks before the foam hardens. Access holes are filled with wood or foam plugs when the installation is complete.

Injection foam can transform leaky, energy-wasting walls into airtight, well-insulated walls that improve interior comfort and reduce monthly utility expenses.

Unlike SPF, injectable foam is not super-sticky and difficult to remove when excess foam attaches itself to finished surfaces. Injection foam simply washes off with water. It’s safe during and after installation because it outgases no harmful fumes.

Get a Free Estimate for injection foam from Charleston's experts

Call 1-855-492-2790 or contact us online to schedule a free home inspection and home insulation estimate. As your local insulation company, we also offer insulation services for your attic, basement, and crawl space as well as air sealing solutions.

We are the authority in injection foam insulation and many types of insulation services in Kentucky, West Virginia and Ohio. Contact us for a Free Estimate in Lexington, Charleston, Huntington, Ashland, Richmond, Barboursville, Frankfort, Paintsville, Mt. Sterling, Georgetown, and more!

Looking for a price? Get a no cost, no obligation free estimate.

our service area

We serve the following areas

  • Allen Junction
  • Amigo
  • Ashford
  • Belle
  • Bloomingrose
  • Blount
  • Blue Creek
  • Bud
  • Cabin Creek
  • Cedar Grove
  • Charleston
  • Clendenin
  • Comfort
  • Corinne
  • Covel
  • Dawes
  • Drybranch
  • Dunbar
  • East Bank
  • Elkview
  • Eskdale
  • Falling Rock
  • Gallagher
  • Glasgow
  • Glen Rogers
  • Handley
  • Hansford
  • Herndon
  • Hernshaw
  • Hugheston
  • Liberty
  • London
  • Maben
  • Mammoth
  • Mc Graws
  • Miami
  • Mullens
  • Orgas
  • Pinch
  • Poca
  • Pond Gap
  • Pratt
  • Racine
  • South Charleston
  • Stephenson
  • Sylvester
  • Tad
  • Whitesville
  • Winifrede
  • Wyco
Our Locations:

Reed's Sprayfoam Insulation
275 Mall Road Suite 11A
South Williamson, KY 41503
1-606-618-0909


Reed's Sprayfoam Insulation
112 Warren Grove Rd
London, KY 40741
1-606-560-6162
Top